Toyota 4Runner 2nd Gen (1990-1995) Bumpers and Sliders
Front bumpers, rear bumpers, winch mounts, tube bumpers and rock sliders for the 1990, 1991, 1992, 1993, 1994 and 1995 4Runner, from Trail-Gear Rock Defense and All-Pro. The Rock Defense bumpers are listed for 6-lug 4WD 4Runners — if your truck is 2WD or 5-lug, check with us before ordering.
Rock Defense Rear Bumper
Arm your second-gen Toyota with this industry's premier trail protection: The Rock Defense Rear Bumper. Engineered specifically for the 6-lug 4WD 4Runner, this bumper is...
Rock Defense Front Bumper
6 Lug 4wd Only (w/ Winch Mount)
When it comes to protecting your truck DOM steel is far stronger and dent resistant when compared to HREW tubing. That's why every...
Rock Defense Front Bumper
6 Lug 4wd Only (w/o Stinger)
When it comes to protecting your truck DOM steel is far stronger and dent resistant when compared to HREW tubing. That's why every Trail-Gear...
Tube Bumper | Options Available
Defend your classic rig on the toughest trails with the All-Pro Series Front Bumper. Engineered to meet the extreme demands of rock crawling and hardcore trail riding,...
Rock Sliders
(w/o Gussets)
Rock sliders are a great way of protecting the rocker panels of your Toyota Pickup, 4Runner, Tacoma, or FJ Cruiser. These Rock Sliders are designed to be the strongest on...
Heavy-Duty Winch MountÂ
If you are looking to build a custom front bumper with professional-grade structural integrity, the LCE Winch Mount Plate is the ultimate foundation. Engineered to serve as a...
Weld-In Frame Gusset
(Web)
Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel.
NOTE: Sold Individually.
Contact our Tech Support Line for further information at...
Weld-On Attachment Point
(Flat)
Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded...
Weld-On Attachment Point
(Coped)
Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is flat on the bottom so that it can be welded...
Weld-In Frame Gusset
(3 Hole Triangle)
Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel.
NOTE: Sold Individually.
Contact our Tech Support Line for further...
Weld-In Frame Gusset
(5 Hole Triangle)
Each gusset measures 3" tall by 3" wide and made from 3/16" mild plate steel.
NOTE: Sold Individually.
Contact our Tech Support Line for further...
People arrive on this page looking for one of four things, so here is the short version of which is which:
A front bumper that clears bigger tyres — low profile, better approach angle.
A front bumper that carries a winch — the mounting plate has to be built in.
A rear bumper — protecting the quarter panels and liftgate, which are the expensive things to straighten.
Rock sliders — rocker panel protection, a separate purchase from either bumper.
One fitment note that matters more than any other on this generation: the Rock Defense bumpers are listed for 6-lug 4WD 4Runners. If your truck is 2WD or 5-lug, check with us before ordering.
Front Bumpers
Two Trail-Gear Rock Defense options, both built entirely from 1.75" x .120" wall DOM tubing with a front 2" receiver:
Rock Defense Low Profile Front — without stinger, and the broadest fitment on the page: 1989-1995 Pickup and 1990-1995 4Runner, 6-lug 4WD.
Rock Defense Front with winch mount — 1990-1995 4Runner, 6-lug 4WD. Mounting holes are drilled for most 5000-9500 class low profile winches and the smaller Warn 9.0R competition winch.
There is also the All-Pro Series tube bumper, listed for the 1989-1995 4Runner and Pickup, with a winch platform and integrated light mounting. It is the low-profile choice for a rig running 35" or larger tyres, and it is made in the USA.
Rear Bumper
The Rock Defense Rear Bumper is engineered for the 6-lug 4WD 4Runner and built from 1035 DOM tubing for high clearance without giving up rigidity. This is the part that stands between a rock and your liftgate.
If you are fabricating rather than buying, the LCE Heavy-Duty Winch Mount Plate for the 1989-1995 Pickup and 4Runner is the foundation — 1/4" steel, CNC laser-cut and bent to fit, so the structural part of the job is already done.
Not certain which bumper suits your build? Tell us the year, the drivetrain, your tyre size and whether a winch is going on, and we will point you at the right one. More for this truck under body and exterior and in the 1990-1995 4Runner catalogue.