Polyurethane bushings for the 1995 through 2004 Tacoma — complete master sets, sway bar bushings and body mounts. The master sets are listed 1995-2000 and 2001-2004, and the sway bar bushings are sold by bar diameter in 25mm, 26mm and 27mm, so measure the bar rather than going by year.
Control Arm Bushings
These bushings maintain proper alignment under extreme conditions on and off -road and during competition. Helps provide quicker steering response and greater vehicle control...
Rear Leaf Spring Bushings
For high-performance applications, the combination of heavy duty or performance leaf springs and performance polyurethane spring bushings deliver the maximum benefit. For...
Front Sway Bar Bushings
(25mm)
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest...
Polyurethane Steering Rack Bushings
Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings...
Front Sway Bar Bushings
(26mm)
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the
greatest...
Front Sway Bar Bushings
(27mm)
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the
greatest...
Front Coil Spring Isolator Bushing
Made of superior HYPER-FLEX polyurethane material. Saves replacing again & again, lasting from 3 to 10 times longer than rubber isolators. Assemble to the chassis...
Tie Rod Boots
(Pair)
At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water,...
The master sets are listed as 1995-2000 or 2001-2004. The body mount set is listed 2001-2004 and covers both 4WD and 2WD. Get the year bracket right and the rest is straightforward.
Buy the Set or Buy the One Bushing?
Worth thinking about before you add to cart, because these trucks are now thirty years old at the front of the range:
One worn bushing, everything else fine — buy the individual part. Sway bar bushings are the usual culprit and the usual search.
The truck clunks, wanders or rides harshly and you have the suspension apart anyway — the master set is the better value, because the labour is the expensive part and you only want to do it once.
The result is a stiffer, more aggressive suspension that stands up to off-road use, and on a truck with tired rubber it also tends to come out quieter than what it replaced, because the slop is gone.
Sway Bar Bushings — Measure First
These are listed by bar diameter: 25mm, 26mm and 27mm. The right one is whichever matches your bar, not whichever matches your year, so put a caliper or a tape on the bar before ordering. This is the single most common reason a bushing order comes back.
Body Mounts
The body mount bushings for the 2001-2004 Tacoma cover 4WD and 2WD. Body mounts are easy to overlook and they are often what is actually moving when a truck feels loose over bumps rather than the suspension itself.
Not Sure What Is Worn?
Tell us the year, the drivetrain and what the truck is doing — clunk, wander, harsh ride, uneven tyre wear — and we will help you work out which bushings are the cause before you buy a full set you may not need. The rest of the truck is in the 1995-2004 Tacoma catalogue.