Exhaust for the 1996, 1997, 1998, 1999, 2000, 2001 and 2002 4Runner — headers, cat-back systems, catalytic converters, mufflers, resonators, weldables and hardware. This generation came with a 2.7L 3RZ-FE four-cylinder or a 3.4L 5VZ-FE V6; some parts are shared but the headers are V6 only, so check the engine as well as the year.
Resonator
(w/o Inlet & Outlet Tubes)
These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system for a quieter...
Resonator
(w/o Inlet & Outlet Flanges)
These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system for a...
Resonator
(w/o Inlet & Outlet Tubes)
These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system to for a...
Resonator
(w/o Inlet & Outlet Tubes)
These are great to use as a muffler for that "old school" sound, or we have used them as a resonator to quiet down your existing exhaust system. The 18" length...
Flex Coupler
(2 1/2" x 6")
To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one...
T3 Inlet Turbo Flange
(4-Bolt)
This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange...
J-Bend 409 Stainless Steel / .065 Wall
(Choose Your Size)
LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is...
Street Header Gasket Set
This is a complete gasket set for the proper installation of our street headers.
Kit Includes:
Hardware
O2 sensor gaskets
OEM 2-1/2" collector donut gasket
Header to...
Stainless Steel U-Bend
(2 1/2")
LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of...
Header Stud Set
The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting...
Garret T3 Exhaust Discharge Flange
(5 Bolt)
All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit.
This 5-bolt flange fits standard...
Merge Collector
(You Choose Size)
You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one...
The 3rd gen 4Runner came with two very different engines, and that decides what fits:
2.7L 3RZ-FE four-cylinder
3.4L 5VZ-FE V6
Some parts are shared — our 47-state catalytic converter is listed for both the 3RZ and the 5VZ. Others are engine-specific, and the headers in particular are V6 only. Every listing states the engine it is built for; if the year and engine are not both a match, it is not the right part.
The LCE 5VZ header kit is built from 16 gauge .065 wall stainless tubing with half-inch flanges, ceramic coated after welding, and ships as a pair with gaskets and hardware. It is listed for 5VZ Tacomas and 4Runners as well as 5VZ-swapped Pickups and 4Runners. It comes without a crossover, so it is designed around a custom exhaust from the collectors back.
Complete Systems
Two bolt-on routes if you would rather not fabricate:
LCE Pro Flow Exhaust System — covers 1996 through 2002 and uses a MagnaFlow straight-through performance muffler.
JBA exhaust, 1996-1998 — listed for both the 2.7L and the 3.4L, 2WD and 4WD. Note the narrower year range.
Catalytic Converters — Read the Emissions Note
The direct-fit converters here, including the rear converter for the 1999-2002 5VZ, are 47-state smog legal and are not legal for installation on California, Colorado or New York emissions controlled vehicles. There is more than one factory converter configuration across these years, so measure before ordering — that rear unit is 31 inches overall.
Not Sure Which Parts Pair Up?
Tell us the year, the engine and whether the truck has to pass a test where you live, and we will confirm the combination before you buy. The rest of the 1996-2002 4Runner catalogue is one level up.