Performance and replacement parts for the 1st gen Toyota 4Runner — 22R, 22RE, factory-turbo 22RTE (1986-1988), and 3VZE 3.0L V6 (1988-1989). LCE's 22R-era catalog applies directly: long blocks, the LCE Stroker, Stage 2-5 camshafts, headers, supercharger and turbo kits, and OEM-spec components.
Rear Main Seal
High-quality silicone seals with a double lip for improved sealing. If you have a big groove worn in the crankshaft seal surface, you'll need one of our seal savers for trouble-free...
Roll Bar Drink Holders
Durable-padded drink holders. Great products for every off-roader.
Features:
Black
Use with 2-3" sport bar
Heavy-duty hook and loop straps
Sold in pairs
Contact our...
PCV Hose
This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover.
OEM Toyota Part #: 12261-35011
Contact our Tech Support Line for further information at 928-575-2174...
Breather Hose
(Front Of Valve Cover)
OEM Toyota hose comes off the valve cover and goes to intake manifold.
OEM Toyota Part #: 12262-35030
NOTE: Not for carbureted applications. For carb...
Toyota OEM Release Fork Support
Genuine Toyota OEM Release Fork Support, part number 31236-30060. This factory replacement component supports the clutch release fork and provides the proper contact...
Valve Cover Hardware Kit
Refresh your top end with this direct-fit valve cover hardware kit.
Kit Includes
(4) Valve Cover Studs
(4) Chrome Acorn Nuts
Multi Purpose Application: In addition to...
Merge Collector
(3-1 1/2″ into 1-2 ¼″)
You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick...
Distributor Plug
This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer.
Contact our Tech Support...
Coolant Temperature Sensor
This coolant temperature sensor is a stock replacement for 22RE/RTE engines. After years of use, a sensor can go bad and give false readings to the ECU, that is why we...
Rear Main Seal
OEM replacement rear main seal. This will install on the big end of the crankshaft. If there is a large groove on the crank seal surface be sure to get our seal saver for...
Thermostat
(195 Degree)
Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature...
LC Engineering Classic Flexfit Hat | Racing Logo
Show off your off-road prude whether you're at the track, on the trail, or in the garage. The LC Engineering Classic Flexfit Hat features our...
The first-generation Toyota 4Runner (1984–1989) is the original factory 4Runner and shares its chassis, engines, and most of its drivetrain with the contemporary 4th gen Toyota Pickup. The engine lineup is the LCE specialty zone: the carbureted 22R 2.4-liter (1984-1987), the fuel-injected 22RE (1985-1989), the factory-turbocharged 22RTE that ran from 1986 through 1988 in very low volume, and the 3VZE 3.0-liter V6 introduced for 1988. The 1984-1985 trucks ran a solid front axle; 1986 onward got the IFS (Independent Front Suspension) revision shared with the Pickup.
LC Engineering has been building performance and replacement parts for the 22R, 22RE, 22RTE, and 3VZE since 1985 — the entire production life of the 1st gen 4Runner and longer than most owners have had their trucks. Our 1st gen 4Runner catalog includes complete long blocks and crate engines, the LCE Stroker (2.7-liter displacement increase), Stage 2 through Stage 5 camshafts, header kits, supercharger and turbo kits, master rebuild kits, suspension components for both the solid-axle and IFS trucks, and the OEM-spec replacement parts that keep these 35+ year old 4Runners on the road.
Browse 1st gen 4Runner parts above by system, or use these starting points: